28 records · 1 briefs · 2 study guides
What you must hold to practice, what employers ask for, which codes you design to, and which regulators can stop a launch — with the prerequisites, renewal cycle and issuing body for each.
Read in depth
Practitioner judgment for civil engineers and PE candidates. Civil is the broadest engineering discipline — these heuristics span its sub-disciplines. Heuristics, not cod…
Read → Study guide · 1 min Civil Engineering Study GuidesCivil engineering has no standalone credential guides in this collection — every civil license and certification is covered by a shared guide (the PE is national; the int…
Read → Compliance brief · 5 min State Engineering Licensing Boards — US Practice-of-Engineering Statutes — Compliance BriefRecord covered: civil-reg-001 Issuing body: Individual state legislatures (statutes) and state licensing boards (e.g. California BPELSG, Texas TBPE, NYSED); the National …
Read →Requires: ABET-accredited engineering degree; pass NCEES Fundamentals of Engineering (FE) exam; 4 years progressive experience under a licensed PE (varies by state); pass NCEES PE Civil exam (some states let you sit the PE early but license only after experience)
Renewal: Biennial in most states; most require ~30 PDH per 2-year cycle (NCEES recommends 15 PDH/yr); fees and ethics hours vary
Requires: Senior standing in or graduation from an ABET-accredited engineering program (some states allow non-accredited paths with extra requirements)
Renewal: none (passing is permanent; title designation EI/EIT may require state registration/renewal in some states)
Requires: PE license (CA requires NCEES PE Structural exam first); pass NCEES SE exams (Vertical + Lateral components, formerly SEI/SEII); 4-8 years structural experience depending on state; some states add state-specific seismic/surveying exams
Renewal: Biennial/triennial renewal like PE; continuing education requirements vary by state
Requires: Accredited MEng degree (or BEng + accredited/approved MSc or equivalent further learning to Masters level); several years Initial Professional Development (IPD); pass Chartered Professional Review (CPR) interview demonstrating UK-SPEC competences
Renewal: Annual retention/registration fee + ongoing CPD commitment; registration maintained through ICE membership
Requires: Accredited Bachelors/Honours degree (or HNC/HND/foundation degree + further learning to degree level); IPD; pass Member Professional Review (MPR)
Renewal: Annual fee + CPD commitment
Requires: National engineering qualification first (e.g. CEng); minimum 7 years 'formation' = secondary education + at least 3 years FEANI-recognized engineering education + at least 2 years professional experience
Renewal: Renewal/registration maintained via national member; Code of Conduct compliance
Requires: CEAB-accredited engineering degree (or technical-exam program for non-accredited); 4 years engineering experience incl. 1 year in a Canadian jurisdiction; pass National Professional Practice Examination (PPE - ethics, law, liability); good character
Renewal: Annual licence renewal; continuing competence/practice review mandatory in 6 of 12 regulators, voluntary/being developed
Requires: Accredited 4-year Bachelor of Engineering (Washington Accord) or equivalent assessment; minimum ~5 years professional experience with demonstrated competency in 16 Chartered competency units; peer-review interview/competency report
Renewal: Annual chartered membership + CPD requirements (Engineers Australia CPD policy)
Requires: 4-year Washington Accord degree (or EA-assessed equivalent); ~5 years experience incl. independent practice; competency assessment by a BPEQ-approved entity (commonly CPEng or NER from Engineers Australia)
Renewal: Registration renewal with CPD evidence (BPEQ requirements)
Requires: Level I: no formal education requirement, entry-level exam; Levels II-IV: progressively more experience (typically 2-8+ years) plus exams; Level IV earns Senior Engineering Technician designation
Renewal: Certification maintenance/renewal with fees; CBT exams via Pearson VUE (rescheduling rules seen on official page)
Requires: No formal prerequisites (open entry); must pass written exam AND hands-on performance exam covering 7 ASTM standards (C1064, C172, C143, C138, C231, C173, C31)
Renewal: Renewal/recertification required (ACI certification terms; typically 5-year cycle with retesting - estimated, not confir
Requires: 4-year degree or PE (or equivalent) per practitioner guides; complete ISI Envision training course (~8h) + study of the 64-credit Envision Guidance Manual; pass ENV SP exam
Renewal: Annual renewal: 7 hours continuing education/year (2 prescribed by ISI + 5 elective) + annual renewal fee (Canadian prog
Requires: Must be employed (current or past) by a public agency. CPWP-S: HS diploma + 3 yrs public works (or less with APWA Public Works Institute). CPWP-M: bachelor + 3 yrs incl. supervisory experience (pathways scaled by education), OR CPWP-S + 3 yrs supervision; exam
Renewal: Recertification cycle per APWA (details not confirmed - estimated)
Requires: n/a (design standard, adopted by reference into building codes)
Renewal: n/a
Requires: n/a
Renewal: n/a
Requires: n/a
Renewal: n/a
Requires: n/a
Renewal: n/a
Requires: n/a
Renewal: n/a
Requires: n/a
Renewal: n/a
Requires: n/a
Renewal: n/a
Requires: n/a
Renewal: n/a
Requires: Varies: typically ABET degree + FE + 4 yrs experience + PE exam
Renewal: License renewal per state (annual/biennial) with CPC/PDH
Requires: Sealed drawings by licensed PE/architect typically required for permit on most commercial and many residential projects
Renewal: Permits per project; inspectors sign off at construction milestones
Requires: n/a - applies to employers/contractors; engineers' designs must consider constructability safety (e.g. excavation, scaffolding, fall protection)
Renewal: n/a
Requires: Coverage required for construction disturbing >=1 acre (or <1 acre in a common plan disturbing >=1 acre); operator files Notice of Intent + develops a Stormwater Pollution Prevention Plan (SWPPP)
Renewal: Permit-term compliance (5-year permit cycles); inspections, monitoring, corrective action
Requires: n/a - triggers on federal funding/permits/land; civil engineers support via environmental assessments
Renewal: Project-specific
Requires: n/a - applies to state DOTs and contractors on federal-aid projects; engineers must design to FHWA-accepted standards
Renewal: Project/grant-based
Requires: Permit required for any discharge of dredged/fill material into waters of the United States (wetlands, streams); civil designs must avoid/minimize/mitigate impacts
Renewal: Permit-specific; mitigation monitoring often multi-year
No records match.
Next step
The Academy maps to the codes your auditors ask about — PPAP, APQP, FMEA, GD&T, ISO 13485 — taught by engineers who have defended designs in production and in court.
Built from the same structure used in the ETS design checklist workflow.
