ETS - Plastics Speaker

Paul A. Tres

ASME, SPE, SAE,
Plastics Academy

Consultant, Lecturer, Author, Expert Witness

NEW! View Paul A.Tres's profile

Paul A. Tres is a best selling author and an international speaker and lecturer on plastic product development and design having years of experience in design, marketing, selling and manufacture of plastic components and systems while serving the plastics and automotive industries.

For his contribution to the spread of knowledge about plastic product design and development he was elected (1998) Fellow of the Society of Plastics Engineers (SPE).

Mr. Tres offers a broad perspective of the plastic industry in general and to the plastic marketing, manufacturing, material selection, and part design in special.

Mr. Tres' expertise extends to manufacturing processes such as in-mold-assembly, co-injection, fusible core injection molding, gas assist injection molding, material selection, multi-shot injection molding and project management with national and international teams of professionals in Brazil, Canada, China, France, Germany, India, Italy, Malaysia, Mexico, South Korea, Thailand, United Kingdom, and United States.

His experience includes innovation strategies, competitive analysis, design trend mapping, new business concepts and the creation of user experiences through integrative interaction of marketing and design.

A practicing consultant, author and lecturer, Paul is the founder of Engineering Training Services, established in 1992 in Michigan as a full service consultancy.

In parallel with his professional activity, he participated as a lecturer to educate design, engineering and marketing professionals about plastics with Grand Valley State University in Grand Rapids, MI (1996-2001), Purdue University in Fort Wayne, IN (2001-2002), Robert Morris University in Waukegan, IL (2010-2011), University of Michigan in Dearborn, MI (2002-2013), University of North Carolina in Charlotte, NC (1998-2001), University of Wisconsin - Madison, WI (1992-1996), and University of Wisconsin - Milwaukee, WI (1998-2002).

Author of Designing Plastics Parts for Assembly textbook published by Carl Hanser Verlag, currently at its 6th English edition and at the 1st Chinese edition, Paul A. Tres is a frequent international lecturer, speaking on plastic product design and development, marketing strategies, product positioning and introduction, design philosophy and robust design to audiences in twelve countries.

Awards

• 1997 Structural Plastics Design Award from Society of Plastics Industry
• 1996 Design for 21st Century Award from Society of Plastics Engineers
• 1993 Excellence in Design Award from Design News magazine
• 1993 DuPont Marketing Excellence Award from E.I. DuPont de Nemours & Co.
• 1992 Powertrain Award from SPE Automotive

Participation

• Member of the Fellow Nomination Committee of Society of Plastics Engineers, 1999-2013
• Councilor Corporate member - French-American Chamber of Commerce, 2003-2004
• Elected Board Member, Detroit Section of SPE, 2002-2005
• Elected Board Member, Product Design and Development Division of SPE, 1994-2003
• Chairman, Product Design and Development Division of SPE (PD3), 1998-1999

Papers, Articles, Lectures & Webinars

• Understanding Critical Aspects of Plastic Part Design and Manufacturing, Webinar in conjunction with Geometric Ltd. - Geometric Limited, Mumbai, India - October 24, 2011
• Designing Plastic Parts for High-Speed Assembly, Webinar for Assembly Magazine - BNP Media, Bensenville, IL - September 3, 2008
• Microspheres: Fillers Filled With Possibilities, Composites Technology - Gardner Publications, Wheat Ridge, CO, April 2008
• Simulation - a primary part of the design process, Modern Plastics Worldwide - Cannon Communications LLC, Los Angeles, CA, July 2007
• Hollow Glass Microspheres Stronger Spheres Tackle Injection Molding, Plastics Technology - Gardner Publications, New York, NY, May 2007.
• High CARB Diet for Fuel Tanks, Modern Plastics - Cannon Communications LLC, Los Angeles, CA, July 2006.
• Notables: 10 Waves of the Future, Modern Plastics - Cannon Communications LLC, Los Angeles, CA, September 2005.
• Designing Plastic Parts for High Speed Assembly, Assembly Technology Expo, Rosemont, IL, September 29, 2004
• Plastics ... Trends in the Industry, Keynote speech - National Plastics Exhibition (NPE2003), Chicago, IL, June 23, 2003
• Bright Future for Plastics, Plastics Insights, Cincinnati, OH, Volume 7, Issue 7, Dec. 2001/Jan. 2002
• Robust Design: ' 98MY DaimlerChrysler Upper Intake Manifold, 5th International Manifold Forum, Spitzingsee, Germany, 1998
• Plastic Part Design for Assembly, National Manufacturing Week Conference, Reed Exhibitions, Chicago, IL, 1998
• Fundamentals of Automotive Plastic Parts Design, Manual, SAE International Congress, Detroit, MI, 1996
• Understanding Safety Factors, Kunststoffe'95 -  International Plastics Design and Processing Conference, Krefeld, Germany, 1995
• Lost Core Injection Molding Technology, SME Automotive Plastics Conference, Troy, MI, 1994
• Snap-Fit Snapshot, Assembly, vol. 36, Hitchcock Publishing Co., 1993

Litigation Support

Legal discovery for patent dispute cases and product litigation cases, review of evidence, technical report preparation, etc for various law firms. Among them:

• Brobeck, Phleger & Harrison, LLP of San Francisco, CA
• Fulmer & Fulmer PA of Lakeland, FL
• Griffin & Szipl P.C. of Arlington, VA
• Kreis, Enderle, Callander & Hudgins, P.C. of Kalamazoo, MI
• La Follette, Johnson, De Haas, Fesler & Ames of Los Angeles, CA
• Lynn, Jackson, Shultz & Lebrun, P.C. of Sioux Falls, SD
• Morgan, Lewis & Bockius, LLP of Washington, DC
• Sellars, Marion & Bachi, P.A. of West Palm Beach, FL
• Slater & Zurz of Akron, OH